Cumberland metals case

The firm primarily provides its services to pooled investment vehicles. It manages separate client focused equity portfolios. The firm invests in the public equity and alternative investment markets of Europe and the United States. It invests in value stocks, typically special situations like takeovers, spin-offs, and mergers.

Cumberland metals case

I enjoy the opportunity afforded to me by my customers to forge and hilt up these sharp pieces which I hope reflect the weaponry of our ancestors.

The blade is double edged and has a shallow fuller groove running centrally. The blade is pattern welded. It consists of a central section of 4 separated bundles which Cumberland metals case alternately twisted in an interrupted twist pattern.

The edges are welded on separately. There is no evidence of rivets. The pommel is an elongated pyramid of bronze, the tang passes through this and is peened. Noteably, despite the small length of the grip, a very comfortable sword to hold, the flaring of the ferrules adding considerably to the ergonomics of the hilt.

It has a three cored continuous twisted core with carbon steel cutting edges hammer welded on. The blade is typical of a 6th century blade. It has been hilted with a 9th century type "L" pattern hilt.

Such swords are often re-hilted as a way of keeping an heirloom sword "alive" to be handed down to later generations of the same family.

Archives -

This was particularly the case when swords were hilted entirely with organic fittings. The core is composed of three bundles of alternating wrought iron and carbon steel layers and each bundle is composed of twenty two layers.

These rods are then placed together and hammerwelded such that the straight and twisted sections coincide with each other across the cores width. This was a very typical pattern for the period.

Manufacturer List

It is somewhat challenging in that time is needed to ensure the twisted section brings the rod around such that the edge layered side of the rod is always exposed to the blades face. The three rods then need to be placed such that the twisted and untwisted sections coincide neatly and symmetrically before the core is welded.

The edge steel is a traditional straight high carbon type. It has a wrought iron blade and a holly wood hilt. The blade is an original from Solingen - date unknown. Such a sword would have been used as a secondary weapon for close combat.

It is a crudely made weapon that would have been made by local blacksmiths.

Cumberland metals case

The blade is mainly wrought iron with a thin steel layer in the middle to provide a cutting edge. It has a stirrup hilt with a scale handle made from elm. The blade is a slightly tapered pattern welded blade of the Gebigs type 3 with a two twist core.

The hilt is an interpretation which features a waisted grip common on many earlier swords of the Germanic tradition. This grip shape takes the heel of the hand away from the edges of the T cosy pommel and prevents the edges from digging into the hand.

The grip and handle shapes are an enigma for many early period swords. The organic components of surviving swords almost always rot away leaving an empty iron tang, which gives very little clue as to what was originally there.

Sometimes ferrules or wire mouldings survive, giving an indication of what existed but this very rare. The blade is a continuous three twist pattern welded core with carbon steel edges.

The hilt is much like the Cumberland hilt composed of organic elements for the cross guard, grip and pommel. The tang button is a small bronze pyramid which keeps it all together. This is a higher status sword with a plain iron hilt and a goatskin covered grip. The blade is a continous three core twist with a steel edge wrap based on the Geibigs Type 3 blade.

The hilt is composed of two straight iron bars with an antler grip. The blade has a core of layered iron with carbon steel edges. An example of a sword of the Viking era which is not pattern welded.

Cumberland metals case

It has a steel blade and an iron crossguard with a goatskin covered ashwood grip. The blade is a three bundled continuous twist core with carbon steel edges and the blade profile is a Geibigs type 1. The sword has a bronze pommel cap featuring two stylized beasts heads back to back.

The blade profile is a Geibigs type 1.

LIST: 75+ Top Hedge Funds (NY)

Folding the billet several times serves to refine the steels structure and average out impurities which makes a stronger blade.Dear Twitpic Community - thank you for all the wonderful photos you have taken over the years.

We have now placed Twitpic in an archived state. Cumberland Metals 1. Cumberland Metal Industries A New Cushion for a Hard Market THUNDERCATS Consulting Blair Belliveau Denzel . STAFFS HOME GUARD WEBSITE - MISC.

INFORMATION KYNOCH WORKS WITTON, BIRMINGHAM from George Kynoch & Co. to IMI plc This is a page within the see full contents, go to SITE MAP.

Paul Binns Swords - Colectors Swords

The singer cried when he looked right at his wife during a commercial break. This is a mid 7th century Anglo Saxon pattern welded blade. The core is composed of three bundles of alternating wrought iron and carbon steel layers and each bundle is composed of twenty two layers. 1 We recommend Cumberland Metal Industries capitalize on their evolving position as a leader in the curled metal industry and effectively launch their new curled metal cushion pads to be positioned as the “new industry standard” in the pile driving market.

History of Kynoch Part 2